DIY Gamer Kit Manual

Let's get making! Follow the video or the step-by-step instructions below!

  2 hours     

STEP BY STEP INSTRUCTIONS

1
The PCB

Take out your Gamer's PCB (Printed Circuit Board) which is pictured to the right. This is what you will be soldering all of your components to in order to build a circuit!

Does your PCB look different?

Don't worry, it works the same. Read more about the differences here.

Set up your PCB similarly to the one pictured on the right. Using your Blu-Tack to firmly hold your PCB in place. This will stop it from moving when soldering components.

Blu-Tack is your friend!

Use your Blu-Tack to firmly hold your PCB in place. This will stop it from moving when soldering components.